raindrip® Drip Irrigation Sprayer Head Micro Sprinkler Half-Circle Fan Spray with Clamp N Pierce 1 pack
In stock
Ready to purchase!- SKU
- 258119
Description
HOW IT WORKS: Releases water in a fan spray, half-circle pattern; amount of water flow is adjusted by turning the dial on the bubbler
USE TO WATER A VARIETY OF AREAS: Ideal for watering groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs
HOW TO INSTALL: Adjustable Flow Bubbler Assembly comes preassembled so it’s ready to install—insert the stake in the ground, elevate or lower riser to preferred height, and connect the attached ¼ in. tubing to larger size supply tubing with the Clamp N Pierce Connector
KEY FEATURES: Adjustable flow bubbler, ¼ in. Clamp N Pierce inlet, adjustable riser, and 13 in. stake come preassembled for a quicker install; Fan spray bubbler releases water in a half-circle pattern; Patented Clamp N Pierce Connector punches a hole into supply tubing and attaches ¼ in. tubing inlet
SPECIFICATIONS: Discharge rates from 0 to 24 GPH, radius from 0 to 13.0 ft. (at 0-30 PSI); half-circle pattern; Adjustable flow bubbler, riser, and ¼ in. tubing made of polyethylene treated with UV inhibitors to prevent fading and cracking; Stake and Clamp N Pierce Connector are made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent fading and cracking
Details
- Ideal for watering groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs
- As part of a complete drip irrigation system, the emitter delivers water gradually; with this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
- Adjustable Flow Micro Sprinkler Assembly comes preassembled so its ready to installinsert the stake in the ground, elevate or lower riser to preferred height, and connect the attached 1/4 in. tubing to larger size supply tubing with the Clamp N Pierce Con
- Periodically check for leaks or damage and replace as needed; recommended operating pressure for most emitters is between 15 to 50 PSI
- Clamp N Pierce Connector pierces into 1/2 in., 5/8 in., and 0.710 in. supply tubing and connects 1/4 in. tubing inlet
More Information
| Manufacturer Number | 172CPUB |
|---|---|
| Hose Diameter | 1/4" |
| Brand | Raindrip |